Ultimate USB Loader GX – Setup Guide

0 Comments

Ultimate USB Loader GX - Setup Guide


This guide will tell you about the Ultimate USB Loader GX 2021+ (Play ISO Backups).

Requirements

For this, you will need to have an SD card and a USB drive. As the USB loader only accepts USB drives, the recommended SD for this is an SD HD card. Because it has the best compatibility and this card will cause no issues and this is formatted to fat32. But don’t use USB 3.0 as it has no compatibility. You have to make sure that both your SD card and USB drive are formatted to FAT32. Also, make a backup of your all files because formatting a drive will delete all your data. Also, you will need a Wii remote and a Nintendo Wii, and make sure that your Wii should be modded for this.

Setup Files

Now you have to click on the following link https://mega.nz/folder/MrIXmA7T#WlptjF0_wFtqy_djxd-_TQ/folder/wqZFAChZ. From here, you need to download the SD zip folder on your computer and then extract that zip folder. You need to plug your SD card into your system and paste the extracted file into the SD card. Then you have to take all the files in the USB folder and paste them into the SD card.

Now you have to connect the internet to your switch. For this, you need to go to the options, then go to the Wii settings and navigate to page 2. Select internet and then you have to go to connection settings then you have to select wireless. After that, click on search for access points, then select your WIFI and enter the password. If you are using an older person, then it will ask you to upgrade. You have to make sure that your Nintendo is fully up to date.

CIOS Setup

Now you have to insert your Sd card into your Wii and then click on your homebrew channel. Now you need to click on the app called D2s Cios Installer and then click on the Load button. This is custom firmware that will allow you to play the games on the USB. You have to press continue and use the D-pad to change the values. You have to set the cIOS to v10beta52 d2x v10, the cIOS base to 57, the cIOS slot to 249, and set the cIOS version to 65535.

Once it is done, you have to press “a” twice and it will start installing, then you have to press “A” again to return and set the next values. You will need to set the cIOS to v10beta52 d2x v10, the cIOS base to 57, the cIOS slot to 249, and set the cIOS version to 65535. After that, press A twice and then enter the final values which are the same as those entered earlier.

USB Setup

Now your custom firmware is installed and now you are able to load Wii backups in USB loader gx. For this, you need to go back your to PC and convert the .iso file into .WBFS. For this, you will need to have a Wii backup manager for windows. Then open the Wii manager, select the files, and it will automatically convert that files to .WBFS. After this, you have to add games to your USB drive but make sure that your USB is compatible with fat32.

Now you have to put your USB into your Wii switch and then go to your Homebrew channel. Then you have to click on USB loader GX and then you have to press the load button. Once it is loaded, then you can see the USB interface. If you want to set a boxer, you have to press the 4th button from the left side and it will also ask you to download the missing files. You need to make sure that you have a good internet connection for this.

After that, go back to the home screen and click on the settings button. Then click on the loader and set the loader settings according to the picture given below.

If you want to install the USB loader GX channel as a channel on the Wii system, then the homebrew channel and Wii channel versions both allow for the support of GameCube games. But the Wii channel version actually has tabs that make the sections organized and easier to use so it is a Wii as this means that the USB loader GX is copied on the Wii internal memory. For this, you also don’t need any executable on your sd card but you will need an SD card to load all the configuration files. To update the loader, you have to install a new channel or you can use the loader’s internal online update feature.

To install this, you need to go to the multi-mod manager and make sure that it is in the USB loader pack file. After that, click on the homebrew channel and then launch the multi-mod manager application. Once it is open, you have to scroll down to wad installation and then select the 2nd option. Once the downloading completes, you can exit the multi-mod manager.

After that, go to the home screen and you will find the USB loader GX mod channel that will allow you to easily access this. Click on it and then install WiiWare games on a USB loader gx, you can do this on both Wii channel and homebrew channel versions. Now you have to go to your PC, then take your wad files and put them in your wad folder on your USB. You can also put them on your SD card. Once you have done that, it will eject the USB drive and insert it into your console.

Now go into USB loader gx’s settings and select features, then scroll down to where it says dump nand to EmuNand and it will dump your Wii internal memory also known as and to your sd card. Then you have to click on everything, this process will start and complete in a few minutes.

Once it is completed, you have to click on Emu wad manager and then select files. After that, select USB, then click on wads and OK. After that, tap on Install.

Once this is done, you have to go to your Wii menu and you will find all your installed games there. You can select any game and then click on Play.



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *