In this guide, you will find out how to BOOST FPS and increase performance on Shatterline. First, you have to make sure that your Windows is fully up to date and then make some basic changes in the Windows game section. Also, you have to make a few changes in the GPU settings, and Windows graphic settings. You have to set the Windows power plan to the ultimate level and ISLC also needs to be fixed. After that, make some changes in the graphic settings to achieve the best FPS and ultimate performance.
First of all, you will need to make sure that your Windows is fully up to date. It is a very important step, as it will give you a phenomenal increase in your game performance.
1.1- You have to go to the bottom left side of your screen to the Search button, write “update” on it, and then click on “Check for update”. A new window will pop up, navigate down, and click “check for updates”. It will scan your machine to see if there are any updates available.
1.2- After that, search game mode in the search bar and press enter. Make sure that the game mode is activated and you will get decent performance. You need to make sure that all your resources are focused on the game that you are playing.
1.3- After that, go to the Xbox game bar under Gaming and deactivate this one as it is causing stuttering and crashing in some games.
1.4- Click on the Captures tab and make sure that the background recording and also the recorded audio is turned OFF.
1.5- Make sure that the auto-upgraded GPU setting is turned on. For this, you have to search graphic settings, you will need an NVidia card of the 1000 series. It will really help with bottlenecks and you can expect a 2 to 5 percent boost in the FPS.
Updating GPU Drivers
You will need to update your GPU drivers or any other outdated drivers. There are two ways to do this.
2.1- Check for updates in the GPU control panel.
If your GPU is running on an older version, then you will not be able to boost your FPS. So do check for updates
2.2- Download from the GPU manufactures website.
You can also Download the GPU software to update it from the following link. https://coderbag.com/product/quickcpu
Power Plan Settings
This is a great and easy way to enhance the performance of your system, as they are highly customizable and effective for disabling some sleep and low-power modes.
3.1- You need to write “edit power plan” in the search column and press enter. Now inside this menu, go to the power option which you will find on top, click on show additional plans and scroll down to select the high-performance power plan.
3.2- After this, go to the bottom left-handed side of your screen to the search bar and run the Command prompt as an administrator. You have to paste this command “powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61”, then press enter and exit.
Now again go to the power play menu and press the refresh button on the top right corner. Then you will find the ultimate performance power plan, you need to select this option.
ISLC Set Up
You have to download it by clicking on the link https://www.wagnardsoft.com/forums/vi… and then save it. Now navigate to the ISIC folder that you saved earlier and run it as an administrator. You need to set the least size to at least 1024 and free memory lower than half of your Ram. Set the custom timer resolution to 0.50 and the ISIC polling rate to 1000. Then click on Start and close it, once it completes.
5.1- You have to boot up the game and select the terrority with the lowest ping. After this, go to Options, then click on the options tab at the top of your screen and make sure that the Resolution is set according to your monitor’s native resolution. Make sure that the Display Mode is set to full screen and then set the Frame rate to 200. Turn off V-sync, and set the Texture quality to High. You have to make sure that object quality, shading quality, particle quality, special effect quality, and water quality all should be set to low. Len flare and screen space reflection both should be turned OFF. Set Anti-aliasing and bloom to OFF.